Global Caché GC-100

The Global Caché GC-100 can be integrated into Home Assistant. GC-100 is a TCP-controllable hardware device which has an array of relays, RS232 serial ports, and flexible ports which can be programmed to be either digital inputs or IR blaster outputs. There are a variety of submodels of the GC-100 which have different amounts of each I/O type.

There is currently support for the following device types within Home Assistant:

• Configuration
• Binary sensor
• Switch

Currently, only relays and ports configured to be digital inputs are supported in Home Assistant. For IR support, please use the iTach remote platform, but note that it will likely not function concurrently on the same GC100 due to limitations in the TCP socket server implementation used by Global Caché.

Configuration

To enable this device, add the following lines to your configuration.yamlThe configuration.yaml file is the main configuration file for Home Assistant. It lists the integrations to be loaded and their specific configurations. In some cases, the configuration needs to be edited manually directly in the configuration.yaml file. Most integrations can be configured in the UI. [Learn more] file. After changing the configuration.yamlThe configuration.yaml file is the main configuration file for Home Assistant. It lists the integrations to be loaded and their specific configurations. In some cases, the configuration needs to be edited manually directly in the configuration.yaml file. Most integrations can be configured in the UI. [Learn more] file, restart Home Assistant to apply the changes. The integration is now shown on the integrations page under Settings > Devices & services. Its entities are listed on the integration card itself and on the Entities tab.

# Example configuration.yaml entry
gc100:
  host: IP_ADDRESS

Binary sensor

To enable this sensor, you first have to set up gc100, and add the following lines to yourconfiguration.yamlThe configuration.yaml file is the main configuration file for Home Assistant. It lists the integrations to be loaded and their specific configurations. In some cases, the configuration needs to be edited manually directly in the configuration.yaml file. Most integrations can be configured in the UI. [Learn more] file:

# Example configuration.yaml entry
binary_sensor:
  - platform: gc100
    ports:
      - '3:1': Doorchime
      - '3:2': Garage Obstruction

Switch

This allows you to control and monitor the relay state on your GC100.

To enable this switch, you first have to set up gc100, and add the following lines to your configuration.yamlThe configuration.yaml file is the main configuration file for Home Assistant. It lists the integrations to be loaded and their specific configurations. In some cases, the configuration needs to be edited manually directly in the configuration.yaml file. Most integrations can be configured in the UI. [Learn more] file. After changing the configuration.yamlThe configuration.yaml file is the main configuration file for Home Assistant. It lists the integrations to be loaded and their specific configurations. In some cases, the configuration needs to be edited manually directly in the configuration.yaml file. Most integrations can be configured in the UI. [Learn more] file, restart Home Assistant to apply the changes. The integration is now shown on the integrations page under Settings > Devices & services. Its entities are listed on the integration card itself and on the Entities tab.

# Example configuration.yaml entry
switch:
  - platform: gc100
    ports:
      - '4:1': Siren
      - '4:2': Sprinkler