Xiaomi Gateway (Aqara)
The Xiaomi Gateway (Aqara) integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] allows you to integrate Xiaomi
There are two versions of the hub: v1 and v2.
-
v1 can be used with Home Assistant without any problems.
-
v2 might be less straightforward when it comes to enabling the local API. It might even require you to open up your device to do so. Xiaomi has suggested this is in the pipeline. If you have a Hub 2 and are experiencing issues, check out the troubleshooting section.
Supported devices
- Aqara Air Conditioning Companion (lumi.acpartner.v3)
- Aqara Intelligent Door Lock (lock.aq1)
- Aqara Wall Switch (Double)
- Aqara Wall Switch (Single)
- Aqara Wall Switch LN (Double)
- Aqara Wall Switch LN (Single)
- Aqara Wireless Switch (Double)
- Aqara Wireless Switch (Single)
- Battery
- Button 1st generation (Single, Double, Long Click)
- Button 2nd generation (Single, Double)
- Cube
- Door and Window Sensor (1st and 2nd generation)
- Gas Leak Detector (reports alarm and density)
- Gateway (Light, Illumination Sensor, Ringtone play)
- Intelligent Curtain
- Motion Sensor (1st and 2nd generation)
- Plug aka Socket (Zigbee version, reports power consumed, power load, state and if the device is in use)
- Smoke Detector (reports alarm and density)
- Temperature and Humidity Sensor (1st and 2nd generation)
- Vibration Sensor
- Wall Plug (reports power consumed, power load, and state)
- Water Leak Sensor
- Xiaomi Mijia Gateway (lumi.gateway.v2, lumi.gateway.v3)
Unsupported devices
- Xiaomi Aqara Gateway (lumi.gateway.aqhm01), as it is not possible to activate dev mode in the Mi Home App.
- Gateway Radio
- Gateway Button
- Xiaomi Mi Air Conditioning Companion (lumi.acpartner.v2)
- Aqara Intelligent Air Conditioner Controller Hub (lumi.acpartner.v1)
- Decoupled mode of the Aqara Wall Switches (Single & Double)
- Additional alarm events of the Gas and Smoke Detector: Analog alarm, battery fault alarm (smoke detector only), sensitivity fault alarm, I2C communication failure
Setup
Follow the setup process using your phone and Mi-Home app. From here you will be able to retrieve the key (password) from within the app following this tutorial
To enable Xiaomi Gateway (Aqara) in your installation, go to Settings > Devices & services. Xiaomi Aqara gateways should be discovered automatically and should show up in the overview. Hit configure and go through the steps to specify the optional settings. If your Aqara gateway does not show up automatically, click the + icon in the lower right. Then, search for “xiaomi_aqara” and enter the setup. Multiple gateways can be configured by simply repeating the setup multiple times.
Entities
The Xiaomi Gateway (Aqara) integration supports the following entities.
Covers
The cover entity allows you to control connected Aquara covers. You can do the following:
- Open the cover.
- Close the cover.
- Stop the cover motion.
- Move the cover to a specific position.
- See the current position of the cover.
Lights
The light entity allows you to control the internal light of the Xiaomi gateway. The entity is called light.gateway_light_28ffffffffff
. You can do the following:
- Turn the light on and off.
- Set the brightness.
- Set the color using HS or RGB color coding.
The requirement is that you have setup Xiaomi aqara.
Locks
An Aqara lock cannot be controlled by Home Assistant. However, the lock entity allows you to view the following data:
-
The property
changed_by
provides the user/key ID of the last successful unlock. -
If someone tries to unlock the device but fails more than 3 times, the
verified_wrong_times
attribute will be incremented. The counter resets on a successful unlock.
Binary sensors
The binary sensor entities allow you to get data from your Xiaomi
Type of binary sensors supported
List of supported binary sensors, including the following properties (if available): name, model no., Zigbee entity, states, and, event, event, key, and event values.
-
Motion Sensor (1st gen)
- Model no.: RTCGQ01LM
- Zigbee entity: motion
- States: on, off
- Event:
xiaomi_aqara.motion
-
Motion Sensor (2nd gen)
- Model no.: RTCGQ11LM
- Zigbee entity: sensor_motion.aq2
- States: on, off
- Event:
xiaomi_aqara.motion
-
Xiaomi Door and Window Sensor (1st gen)
- Model no.: MCCGQ01LM
- Zigbee entity: magnet
- States: on, off
-
Aqara Door and Window Sensor (2nd gen)
- Model no.: MCCGQ11LM
- Zigbee entity: sensor_magnet.aq2
- States: on, off
-
Smoke Detector
- Model no.: JTYJ-GD-01LM/BW
- Zigbee entity: smoke
- States: on, off
-
Gas Leak Detector
- Model no.: JTQJ-BF-01LM/BW
- Zigbee entity: natgas
- States: on, off
-
Water Leak Sensor
- Model no.: SJCGQ11LM
- Zigbee entity: sensor_wleak.aq1
- States: on, off
-
Button (1st gen)
- Model no.: WXKG01LM
- Zigbee entity: switch
- States: on (through long_click_press), off
- Event:
xiaomi_aqara.click
- Event key:
click_type
- Event values:
long_click_press
,hold
,single
,double
-
Button (2nd gen)
- Model no.: WXKG11LM
- Zigbee entity: sensor_switch.aq2, remote.b1acn01
- States: on (through long_click_press), off
- Event:
xiaomi_aqara.click
- Event key:
click_type
- Event values:
single
,double
,long_click_press
,hold
-
Button (2nd gen, model b)
- Model no.: WXKG12LM
- Zigbee entity: sensor_switch.aq3
- States: off (always)
- Event:
xiaomi_aqara.click
- Event key:
click_type
- Event values:
single
,double
,long_click_press
,shake
-
Aqara Wireless Switch (Single)
- Model no.: WXKG03LM
- Zigbee entity: 86sw1
- States: off (always)
- Event:
xiaomi_aqara.click
- Event key:
click_type
- Event values:
single
-
Aqara Wireless Switch (Double)
- Model no.: WXKG02LM
- Zigbee entity: 86sw2
- States: off (always)
- Event:
xiaomi_aqara.click
- Event key:
click_type
- Event values:
single
,both
-
Aqara Wireless Switch (Single) (2nd gen)
- Model no.: WXKG03LM
- Zigbee entity: remote.b186acn01
- States: off (always)
- Event:
xiaomi_aqara.click
- Event key:
click_type
- Event values:
single
,double
,long
-
Aqara Wireless Switch (Double) (2nd gen)
- Model no.: WXKG02LM
- Zigbee entity: remote.b286acn01
- States: off (always)
- Event:
xiaomi_aqara.click
- Event key:
click_type
- Event values:
single
,double
,long
,both
,double_both
,long_both
-
Cube
- Model no.: MFKZQ01LM
- Zigbee entity: cube
- States: off (always)
- Event:
xiaomi_aqara.cube_action
- Event key:
action_type
,action_value
(rotate) - Event values:
flip90
,flip180
,move
,tap_twice
,shake_air
,swing
,alert
,free_fall
,rotate
(degrees at action_value)
-
Vibration Sensor
- Model no.: DJT11LM
- Zigbee entity: vibration
- States: off (always)
- Event:
xiaomi_aqara.movement
- Event key:
movement_type
- Event values:
vibrate
,tilt
,free_fall
Automation examples for binary sensors
Motion
- alias: "If there is motion and it's dark turn on the gateway light"
triggers:
- trigger: state
entity_id: binary_sensor.motion_sensor_158d000xxxxxc2
from: "off"
to: "on"
conditions:
- condition: numeric_state
entity_id: sensor.illumination_34ce00xxxx11
below: 300
actions:
- action: light.turn_on
target:
entity_id: light.gateway_light_34ce00xxxx11
data:
brightness: 5
- action: automation.turn_on
target:
entity_id: automation.MOTION_OFF
- alias: "If there no motion for 5 minutes turn off the gateway light"
triggers:
- trigger: state
entity_id: binary_sensor.motion_sensor_158d000xxxxxc2
from: "on"
to: "off"
for:
minutes: 5
actions:
- action: light.turn_off
target:
entity_id: light.gateway_light_34ce00xxxx11
- action: automation.turn_off
target:
entity_id: automation.Motion_off
Door and/or indow binary sensors
- alias: "If the window is open turn off the radiator"
triggers:
- trigger: state
entity_id: binary_sensor.door_window_sensor_158d000xxxxxc2
from: "off"
to: "on"
actions:
- action: climate.set_operation_mode
target:
entity_id: climate.livingroom
data:
operation_mode: "Off"
- alias: "If the window is closed for 5 minutes turn on the radiator again"
triggers:
- trigger: state
entity_id: binary_sensor.door_window_sensor_158d000xxxxxc2
from: "on"
to: "off"
for:
minutes: 5
actions:
- action: climate.set_operation_mode
target:
entity_id: climate.livingroom
data:
operation_mode: "Smart schedule"
- alias: "Notify if door is opened when away"
triggers:
- trigger: state
entity_id: binary_sensor.door_window_sensor_15xxxxxxc9xx6b
from: "off"
to: "on"
conditions:
- condition: state
entity_id: group.family
state: "not_home"
actions:
- action: notify.notify_person
data:
message: "The door has been opened"
Smoke
- alias: "Send notification on fire alarm"
triggers:
- trigger: state
entity_id: binary_sensor.smoke_sensor_158d0001574899
from: "off"
to: "on"
actions:
- action: notify.html5
data:
title: "Fire alarm!"
message: "Fire/Smoke detected!"
- action: xiaomi_aqara.play_ringtone
data:
gw_mac: xxxxxxxxxxxx
ringtone_id: 2
ringtone_vol: 100
Gas
- alias: "Send notification on gas alarm"
triggers:
- trigger: state
entity_id: binary_sensor.natgas_sensor_158dxxxxxxxxxx
from: "off"
to: "on"
actions:
- action: notify.html5
data:
title: "Gas alarm!"
message: "Gas with a density of {{ state_attr('binary_sensor.natgas_sensor_158dxxxxxxxxxx', 'density') }} detected."
Xiaomi Wireless Button
There are 3 versions of the Xiaomi Wireless button:
- For the round shaped button, the available events are
single
,double
,hold
,long_click_press
andlong_click_release
. - Aqara branded buttons are square shaped. Model WXKG11LM only supports
single
,double
,long_click_press
andhold
events. WXKG12LM supportssingle
,double
,long_click_press
andshake
events.
For the Aqara versions, the delay between two clicks to generate a double-click must be larger than with the round button. Clicking too quickly generates a single-click event.
- alias: "Toggle dining light on single press"
triggers:
- trigger: event
event_type: xiaomi_aqara.click
event_data:
entity_id: binary_sensor.switch_158d000xxxxxc2
click_type: single
actions:
- action: switch.toggle
target:
entity_id: switch.wall_switch_left_158d000xxxxx01
- alias: "Toggle couch light on double click"
triggers:
- trigger: event
event_type: xiaomi_aqara.click
event_data:
entity_id: binary_sensor.switch_158d000xxxxxc2
click_type: double
actions:
- action: switch.toggle
target:
entity_id: switch.wall_switch_right_158d000xxxxx01
- alias: "Let a dog bark on long press"
triggers:
- trigger: event
event_type: xiaomi_aqara.click
event_data:
entity_id: binary_sensor.switch_158d000xxxxxc2
click_type: long_click_press
actions:
- action: xiaomi_aqara.play_ringtone
data:
gw_mac: xxxxxxxxxxxx
ringtone_id: 8
ringtone_vol: 8
Xiaomi Cube
Available events are flip90
, flip180
, move
, tap_twice
, shake_air
, swing
, alert
, free_fall
and rotate
. The integration stores the last action as the attribute last_action
.
- alias: "Cube event flip90"
triggers:
- trigger: event
event_type: xiaomi_aqara.cube_action
event_data:
entity_id: binary_sensor.cube_15xxxxxxxxxxxx
action_type: flip90
actions:
- action: light.turn_on
target:
entity_id: light.gateway_light_28xxxxxxxxxx
data:
color_name: "springgreen"
- alias: "Cube event flip180"
triggers:
- trigger: event
event_type: xiaomi_aqara.cube_action
event_data:
entity_id: binary_sensor.cube_15xxxxxxxxxxxx
action_type: flip180
actions:
- action: light.turn_on
target:
entity_id: light.gateway_light_28xxxxxxxxxx
data:
color_name: "darkviolet"
- alias: "Cube event move"
triggers:
- trigger: event
event_type: xiaomi_aqara.cube_action
event_data:
entity_id: binary_sensor.cube_15xxxxxxxxxxxx
action_type: move
actions:
- action: light.turn_on
target:
entity_id: light.gateway_light_28xxxxxxxxxx
data:
color_name: "gold"
- alias: "Cube event tap_twice"
triggers:
- trigger: event
event_type: xiaomi_aqara.cube_action
event_data:
entity_id: binary_sensor.cube_15xxxxxxxxxxxx
action_type: tap_twice
actions:
- action: light.turn_on
target:
entity_id: light.gateway_light_28xxxxxxxxxx
data:
color_name: "deepskyblue"
- alias: "Cube event shake_air"
triggers:
- trigger: event
event_type: xiaomi_aqara.cube_action
event_data:
entity_id: binary_sensor.cube_15xxxxxxxxxxxx
action_type: shake_air
actions:
- action: light.turn_on
target:
entity_id: light.gateway_light_28xxxxxxxxxx
data:
color_name: "blue"
Aqara Wireless Switch
The Aqara Wireless Switch is available as single-key and double-key version. Each key behaves like the Wireless Button limited to the click event single
. The double key version adds a third device called binary_sensor.wall_switch_both_158xxxxxxxxx12
which reports a click event called both
if both keys are pressed.
- alias: "Decrease brightness of the gateway light"
triggers:
- trigger: event
event_type: xiaomi_aqara.click
event_data:
entity_id: binary_sensor.wall_switch_left_158xxxxxxxxx12
click_type: single
actions:
- action: light.turn_on
target:
entity_id: light.gateway_light_34xxxxxxxx13
data:
brightness: >-
{% if state_attr('light.gateway_light_34xxxxxxxx13', 'brightness') %}
{% if state_attr('light.gateway_light_34xxxxxxxx13', 'brightness') - 60 >= 10 %}
{{state_attr('light.gateway_light_34xxxxxxxx13', 'brightness') - 60}}
{% else %}
{{state_attr('light.gateway_light_34xxxxxxxx13', 'brightness')}}
{% endif %}
{% else %}
10
{% endif %}
- alias: "Increase brightness of the gateway light"
triggers:
- trigger: event
event_type: xiaomi_aqara.click
event_data:
entity_id: binary_sensor.wall_switch_right_158xxxxxxxxx12
click_type: single
actions:
- action: light.turn_on
target:
entity_id: light.gateway_light_34xxxxxxxx13
data:
brightness: >-
{% if state_attr('light.gateway_light_34xxxxxxxx13', 'brightness') %}
{% if state_attr('light.gateway_light_34xxxxxxxx13', 'brightness') + 60 <= 255 %}
{{state_attr('light.gateway_light_34xxxxxxxx13', 'brightness') + 60}}
{% else %}
{{state_attr('light.gateway_light_34xxxxxxxx13', 'brightness')}}
{% endif %}
{% else %}
10
{% endif %}
- alias: "Turn off the gateway light"
triggers:
- trigger: event
event_type: xiaomi_aqara.click
event_data:
entity_id: binary_sensor.wall_switch_both_158xxxxxxxxx12
click_type: both
actions:
- action: light.turn_off
target:
entity_id: light.gateway_light_34xxxxxxxx13
Vibration sensor
This automation toggles the living room lamp on vibration/tilt.
- alias: "Turn on Living Room Lamp on vibration"
triggers:
- trigger: event
event_type: xiaomi_aqara.movement
event_data:
entity_id: binary_sensor.vibration_xxxx000000
movement_type: vibrate
actions:
- action: light.toggle
target:
entity_id: light.living_room_lamp
- alias: "Turn on Living Room Lamp on tilt"
triggers:
- trigger: event
event_type: xiaomi_aqara.movement
event_data:
entity_id: binary_sensor.vibration_xxxx000000
movement_type: tilt
actions:
- action: light.toggle
target:
entity_id: light.living_room_lamp
Sensors
The sensor entity allows you to read data from your Xiaomi
The following sensor types are supported:
- Battery level (in percentage)
- Bed activity / vibration (in micrometers)
- Coordination
- Humidity (in percentage)
- Illumination (in lux)
- Power consumed (in kWh)
- Power load (in Watt)
- Pressure (in hPa)
- Temperature (depends on UI settings, Celsius or Fahrenheit)
- Tilt angle
Switches
The switch entity allows you to get data from your Xiaomi aqara
Actions
The gateway provides the following actions:
Action xiaomi_aqara.play_ringtone
Play a specific ringtone. The version of the gateway firmware must be 1.4.1_145
at least. Take a look at the examples below.
Data attribute | Optional | Description |
---|---|---|
gw_mac |
no | MAC address of the Xiaomi Aqara Gateway |
ringtone_id |
no | One of the allowed ringtone ids |
ringtone_vol |
yes | The volume in percent |
Allowed values of the ringtone_id
are:
- Alarms
- 0 - Police car 1
- 1 - Police car 2
- 2 - Accident
- 3 - Countdown
- 4 - Ghost
- 5 - Sniper rifle
- 6 - Battle
- 7 - Air raid
- 8 - Bark
- Doorbells
- 10 - Doorbell
- 11 - Knock at a door
- 12 - Amuse
- 13 - Alarm clock
- Alarm clock
- 20 - MiMix
- 21 - Enthusiastic
- 22 - GuitarClassic
- 23 - IceWorldPiano
- 24 - LeisureTime
- 25 - ChildHood
- 26 - MorningStreamLiet
- 27 - MusicBox
- 28 - Orange
- 29 - Thinker
- Custom ringtones (uploaded by the Mi Home app) starting from 10001
Action xiaomi_aqara.stop_ringtone
Stops a playing ringtone immediately.
Data attribute | Optional | Description |
---|---|---|
gw_mac |
no | MAC address of the Xiaomi Aqara Gateway |
Action xiaomi_aqara.add_device
Enables the join permission of the Xiaomi Aqara Gateway for 30 seconds. A new device can be added afterwards by pressing the pairing button once.
Data attribute | Optional | Description |
---|---|---|
gw_mac |
no | MAC address of the Xiaomi Aqara Gateway |
Action xiaomi_aqara.remove_device
Removes a specific device. The removal is required if a device shall be paired with another gateway.
Data attribute | Optional | Description |
---|---|---|
gw_mac |
no | MAC address of the Xiaomi Aqara Gateway |
device_id |
no | Hardware address of the device to remove |
Examples
Long press on smart button 1st generation
This example plays the sound of a dog barking when the button is held down and stops the sound when the button is pressed once. Only works for the round button of the 1st generation.
Note: The sound will stop playing automatically when it has ended.
- alias: "Let a dog bark on long press"
triggers:
- trigger: event
event_type: xiaomi_aqara.click
event_data:
entity_id: binary_sensor.switch_158d000xxxxxc2
click_type: long_click_press
actions:
- action: xiaomi_aqara.play_ringtone
data:
gw_mac: xxxxxxxxxxxx
ringtone_id: 8
ringtone_vol: 8
- alias: "Stop barking immediately on single click"
triggers:
- trigger: event
event_type: xiaomi_aqara.click
event_data:
entity_id: binary_sensor.switch_158d000xxxxxc2
click_type: single
actions:
- action: xiaomi_aqara.stop_ringtone
data:
gw_mac: xxxxxxxxxxxx
Double click on smart button
This example toggles the living room lamp on a double click of the button.
- alias: "Double Click to toggle living room lamp"
triggers:
- trigger: event
event_type: xiaomi_aqara.click
event_data:
entity_id: binary_sensor.switch_158d000xxxxxc2
click_type: double
actions:
- action: light.toggle
target:
entity_id: light.living_room_lamp
Troubleshooting
Initial setup problem
If you run into trouble initializing the gateway with your app, try another smartphone. E.g., it didn’t work on an OnePlus 3, but it worked with a Nexus 5.
Connection problem
2017-08-20 16:51:19 ERROR (SyncWorker_0) [homeassistant.components.xiaomi] No gateway discovered
2017-08-20 16:51:20 ERROR (MainThread) [homeassistant.setup] Setup failed for xiaomi: Component failed to initialize.
That means that Home Assistant is not getting any response from your Xiaomi gateway. Might be a local network problem or your firewall.
- Make sure you have enabled LAN access
. - Turn off the firewall on the system where Home Assistant is running.
- Ensure your router supports multicast as this is a requirement of the Xiaomi Gateway.
- Try to disable and then enable LAN access.
- Hard reset the gateway: Press the button of the gateway 30 seconds and start again from scratch.
- If you are using Home Assistant in Docker, make sure to use
--net=host
. - If you receive an
{"error":"Invalid key"}
in your log while trying to control the gateway light- You should generate the key again using an Android Phone or alternatively an emulator such as bluestacks
. In some instances, there is an issue with keys being generated using the iOS application. - You need to make sure to have multicast support on your network. If you are running Home Assistant in a virtual machine (like Proxmox), try
echo 0 >/sys/class/net/vmbr0/bridge/multicast_snooping
on the host and restart the service or reboot the host.
- You should generate the key again using an Android Phone or alternatively an emulator such as bluestacks
- If the required library “PyXiaomiGateway” cannot be installed you will need to install some missing system dependencies
python3-dev
,libssl-dev
,libffi-dev
manually (e.g.,$ sudo apt-get install python3-dev libssl-dev libffi-dev
).
If your gateway’s MAC address starts with 04:CF:8C
or 7C:49:EB
, there is a good chance that the required port 9898
is closed on your gateway and thus, this method doesn’t work. There are workarounds available online, however this requires soldering and working with electricity.