amcrest platform allows you to integrate your Amcrest IP camera in Home Assistant.
To enable your camera in your installation, add the following to your
# Example configuration.yaml entry camera: - platform: amcrest host: IP_ADDRESS username: USERNAME password: PASSWORD
- host (Required): The IP address or hostname of your camera. If using hostname, make sure the DNS works as expected.
- username (Required): The username for accessing your camera.
- password (Required): The password for accessing your camera.
- name (Optional): This parameter allows you to override the name of your camera. The default is “Amcrest Camera”.
- port (Optional): The port that the camera is running on. The default is 80.
- resolution (Optional): This parameter allows you to specify the camera resolution. For a high resolution (1080/720p), specify the option
high. For VGA resolution (640x480p), specify the option
low. If omitted, it defaults to high.
- stream_source (Optional): The data source for the live stream.
mjpegwill use the camera’s native MJPEG stream, whereas
snapshotwill use the camera’s snapshot API to create a stream from still images. You can also set the
rtspoption to generate the streaming via RTSP protocol. If omitted, it defaults to mjpeg.
- ffmpeg_arguments: (Optional): Extra options to pass to ffmpeg, e.g. image quality or video filter options.
Note: Amcrest cameras with newer firmwares no longer have the ability to stream
high definition video with MJPEG encoding. You may need to use
low resolution stream or the
snapshot stream source instead. If the quality seems too poor, lower the
Frame Rate (FPS) and max out the
Bit Rate settings in your camera’s configuration manager.
Note: If you set the
stream_source option to
rtsp, make sure to follow the steps mentioned at
FFMPEG documentation to install the
To check if your Amcrest camera is supported/tested, visit the supportability matrix link from the