2024.9.2
Home ▸ Integrations ▸

SMLIGHT SLZB

The SMLIGHT SLZB-06x Ethernet Zigbee coordinators provide a convenient way to add Zigbee to your smart home setup.

The SMLIGHT SLZB integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] allows users to monitor and manage their SLZB-06x devices directly from within Home Assistant and to directly access many of the features found in the SMLIGHT web UI. You can also use these in your automations.

Prerequisites

You need a supported SLZB-06 adapter.

This integration has been tested with the following devices:

Core firmware on your SLZB-06x device must be 2.3.6 or newer. If you have an older version, update using the SMLIGHT Web UI before installing this integration.

Configuration

To add the SMLIGHT SLZB device to your Home Assistant instance, use this My button:

SMLIGHT SLZB can be auto-discovered by Home Assistant. If an instance was found, it will be shown as Discovered. You can then set it up right away.

Manual configuration steps

If it wasn’t discovered automatically, don’t worry! You can set up a manual integration entry:

  • Browse to your Home Assistant instance.

  • Go to Settings > Devices & Services.

  • In the bottom right corner, select the Add Integration button.

  • From the list, select SMLIGHT SLZB.

  • Follow the instructions on screen to complete the setup.

Integration entities

The following sensors will be created:

  • Core Temperature - Temperature of core ESP32
  • Zigbee Temperature - Temperature of Zigbee CC2652 or EFR32 chip
  • Core Uptime - Uptime of Core device
  • Zigbee Uptime - Uptime of Zigbee connection to ZHA/Z2M
  • RAM Usage - Monitor RAM Usage
  • FS Usage - Monitor filesystem usage