MQTT Image
The mqtt image platform allows you to integrate the content of an image file sent through MQTT into Home Assistant as an image.
The image platform is a simplified version of the camera platform that only accepts images.
Every time a message under the image_topic in the configuration is received, the image displayed in Home Assistant will also be updated. Messages received on image_topic should contain the full contents of an image file, for example, a JPEG image, without any additional encoding or metadata.
This can be used with an application or a service capable of sending images through MQTT.
An alternative setup is to use the url_topic option to receive an image URL for a new picture to show.
Configuration
To enable this image in your installation, add the following to your configuration.yaml file:
# Example configuration.yaml entry
mqtt:
- image:
url_topic: mynas/status/url
Configuration Variables
A list of MQTT topics subscribed to receive availability (online/offline) updates. Must not be used together with availability_topic.
The payload that represents the available state.
The payload that represents the unavailable state.
When availability is configured, this controls the conditions needed to set the entity to available. Valid entries are all, any, and latest. If set to all, payload_available must be received on all configured availability topics before the entity is marked as online. If set to any, payload_available must be received on at least one configured availability topic before the entity is marked as online. If set to latest, the last payload_available or payload_not_available received on any configured availability topic controls the availability.
Defines a template to extract device’s availability from the availability_topic. To determine the devices’s availability result of this template will be compared to payload_available and payload_not_available.
The MQTT topic subscribed to receive availability (online/offline) updates. Must not be used together with availability.
The content type of and image data message received on image_topic. This option cannot be used with the url_topic because the content type is derived when downloading the image.
Information about the device this image is a part of to tie it into the device registry. Only works through MQTT discovery and when unique_id is set. At least one of identifiers or connections must be present to identify the device.
A link to the webpage that can manage the configuration of this device. Can be either an http://, https:// or an internal homeassistant:// URL.
A list of connections of the device to the outside world as a list of tuples [connection_type, connection_identifier]. For example the MAC address of a network interface: "connections": [["mac", "02:5b:26:a8:dc:12"]].
A list of IDs that uniquely identify the device. For example a serial number.
Flag which defines if the entity should be enabled when first added.
The encoding of the payloads received. Set to "" to disable decoding of incoming payload. Use image_encoding to enable Base64 decoding on image_topic.
The category of the entity.
The encoding of the image payloads received. Set to "b64" to enable base64 decoding of image payload. If not set, the image payload must be raw binary data.
The MQTT topic to subscribe to receive the image payload of the image to be downloaded. Ensure the content_type type option is set to the corresponding content type. This option cannot be used together with the url_topic option. But at least one of these option is required.
Defines a template to extract the JSON dictionary from messages received on the json_attributes_topic.
The MQTT topic subscribed to receive a JSON dictionary payload and then set as sensor attributes. Implies force_update of the current sensor state when a message is received on this topic.
The name of the image. Can be set to null if only the device name is relevant.
An ID that uniquely identifies this image. If two images have the same unique ID Home Assistant will raise an exception.
Defines a template to extract the image URL from a message received at url_topic.
The MQTT topic to subscribe to receive an image URL. A url_template option can extract the URL from the message. The content_type will be derived from the image when downloaded. This option cannot be used together with the image_topic option, but at least one of these options is required.
Example receiving images from a URL
Add the configuration below to your configuration.yaml.
To test it publish an image URL to the topic from the console:
mosquitto_pub -h <mqtt_broker> -t mynas/status/url -m "https://design.home-assistant.io/images/logo.png"
# Example configuration.yaml entry
mqtt:
- image:
url_topic: mynas/status/url
Example receiving images from a file
Add the configuration below to your configuration.yaml.
To test it, publish an image URL to the topic from the console:
mosquitto_pub -h <mqtt_broker> -t mynas/status/file -f <logo.png>
# Example configuration.yaml entry
mqtt:
- image:
image_topic: mynas/status/file
content_type: image/png