Edimax

This edimax switch integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] allows you to control the state of your Edimax switches.

To use your Edimax switch in your installation, add the following to your configuration.yamlThe configuration.yaml file is the main configuration file for Home Assistant. It lists the integrations to be loaded and their specific configurations. In some cases, the configuration needs to be edited manually directly in the configuration.yaml file. Most integrations can be configured in the UI. [Learn more] file. After changing the configuration.yamlThe configuration.yaml file is the main configuration file for Home Assistant. It lists the integrations to be loaded and their specific configurations. In some cases, the configuration needs to be edited manually directly in the configuration.yaml file. Most integrations can be configured in the UI. [Learn more] file, restart Home Assistant to apply the changes. The integration is now shown on the integrations page under Settings > Devices & services. Its entities are listed on the integration card itself and on the Entities tab.

# Example configuration.yaml entry
switch:
  - platform: edimax
    host: 192.168.1.32

Power consumption sensor

Starting with version 2 of the firmware, the Edimax switches can also report the current and accumulated daily power consumption in their state objects. Use a template sensor to extract their values:

template:
  - sensor:
    - name: Edimax Current power consumption
      unit_of_measurement: "W"
      state: "{{ state_attr('switch.edimax_smart_plug', 'current_power_w') | default(0, true) }}"
      
    - name: Edimax Accumulated daily power consumption
      unit_of_measurement: "kWh"
      state: "{{ state_attr('switch.edimax_smart_plug', 'today_energy_kwh') | default(0, true) }}"

Note that if the smart plug is off, these states report the string None. By using a replace() in the template, these sensors report purely numerical values.