Zabbix

The Zabbix integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] is the main integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] to connect to a Zabbix monitoring instance via the Zabbix API.

It is possible to publish Home Assistant state changes to Zabbix. In Zabbix a host has to be created which will contain the Home Assistant states as individual items. These items are automatically created using Zabbix Low-Level Discovery (LLD). In order to make setup in Zabbix easy, you can use this template for the host.

There is currently also support for the following device types within Home Assistant:

• Sensor

Configuration

To set the Zabbix integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] up, add the following information to your configuration.yamlThe configuration.yaml file is the main configuration file for Home Assistant. It lists the integrations to be loaded and their specific configurations. In some cases, the configuration needs to be edited manually directly in the configuration.yaml file. Most integrations can be configured in the UI. [Learn more] file. After changing the configuration.yamlThe configuration.yaml file is the main configuration file for Home Assistant. It lists the integrations to be loaded and their specific configurations. In some cases, the configuration needs to be edited manually directly in the configuration.yaml file. Most integrations can be configured in the UI. [Learn more] file, restart Home Assistant to apply the changes. The integration is now shown on the integrations page under Settings > Devices & services. Its entities are listed on the integration card itself and on the Entities tab.

# Example configuration.yaml entry
zabbix:
  host: IP_ADDRESS

Full configuration

# Example configuration.yaml entry
zabbix:
  host: ZABBIX_HOST
  path: ZABBIX_PATH
  ssl: false
  username: USERNAME
  password: PASSWORD
  publish_states_host: homeassistant
  exclude:
    domains:
      - device_tracker
    entities:
      - sun.sun
      - sensor.time

Configure filter

By default, no entity will be excluded. To limit which entities are being published to Zabbix, you can use the include and exclude parameters.

# Example filter to include specified domains and exclude specified entities
zabbix:
  include:
    domains:
      - alarm_control_panel
      - light
    entity_globs:
      - binary_sensor.*_occupancy
  exclude:
    entities:
      - light.kitchen_light

Filters are applied as follows:

1. No filter
   • All entities included
2. Only includes
   • Entity listed in entities include: include
   • Otherwise, entity matches domain include: include
   • Otherwise, entity matches glob include: include
   • Otherwise: exclude
3. Only excludes
   • Entity listed in exclude: exclude
   • Otherwise, entity matches domain exclude: exclude
   • Otherwise, entity matches glob exclude: exclude
   • Otherwise: include
4. Domain and/or glob includes (may also have excludes)
   • Entity listed in entities include: include
   • Otherwise, entity listed in entities exclude: exclude
   • Otherwise, entity matches glob include: include
   • Otherwise, entity matches glob exclude: exclude
   • Otherwise, entity matches domain include: include
   • Otherwise: exclude
5. Domain and/or glob excludes (no domain and/or glob includes)
   • Entity listed in entities include: include
   • Otherwise, entity listed in exclude: exclude
   • Otherwise, entity matches glob exclude: exclude
   • Otherwise, entity matches domain exclude: exclude
   • Otherwise: include
6. No Domain and/or glob includes or excludes
   • Entity listed in entities include: include
   • Otherwise: exclude

The following characters can be used in entity globs:

* - The asterisk represents zero, one, or multiple characters ? - The question mark represents zero or one character

Sensor

The zabbix sensor platform let you monitor the current count of active triggers for your Zabbix monitoring instance.

To set it up, add the following information to your configuration.yamlThe configuration.yaml file is the main configuration file for Home Assistant. It lists the integrations to be loaded and their specific configurations. In some cases, the configuration needs to be edited manually directly in the configuration.yaml file. Most integrations can be configured in the UI. [Learn more] file:

# Example configuration.yaml entry
sensor:
  - platform: zabbix
    triggers:
      name: Important Hosts Trigger Count
      hostids: [10051,10081,10084]
      individual: true