The Energy Detective TED5000

The ted 5000 monitors electricity consumption/production by connecting to the TED gateway, itself connected to one or several Measuring Transmitting Units (MTU). The platform creates up to two sensors per MTU, one for Wattage the other for Voltage.

If you want to enable the ted5000 integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more], add the following lines to your configuration.yamlThe configuration.yaml file is the main configuration file for Home Assistant. It lists the integrations to be loaded and their specific configurations. In some cases, the configuration needs to be edited manually directly in the configuration.yaml file. Most integrations can be configured in the UI. [Learn more] file. After changing the configuration.yamlThe configuration.yaml file is the main configuration file for Home Assistant. It lists the integrations to be loaded and their specific configurations. In some cases, the configuration needs to be edited manually directly in the configuration.yaml file. Most integrations can be configured in the UI. [Learn more] file, restart Home Assistant to apply the changes. The integration is now shown on the integrations page under Settings > Devices & services. Its entities are listed on the integration card itself and on the Entities tab.

# Example configuration.yaml entry
sensor:
  - platform: ted5000
    host: 192.168.1.100

For each plugged MTU, using an index starting at 1, the platform creates 2 sensors:

sensor.<name>_mtu<MTU id>_power
sensor.<name>_mtu<MTU id>_voltage