2024.11.3
Home ▸ Integrations ▸

Rogers Hitron CODA

This integration offers presence detection by examining devices connected to a Rogers Hitron CODA or Shaw Hitron CGNM Router.

To use a Hitron router in your installation, add the following to your configuration.yamlThe configuration.yaml file is the main configuration file for Home Assistant. It lists the integrations to be loaded and their specific configurations. In some cases, the configuration needs to be edited manually directly in the configuration.yaml file. Most integrations can be configured in the UI. [Learn more] file. After changing the configuration.yamlThe configuration.yaml file is the main configuration file for Home Assistant. It lists the integrations to be loaded and their specific configurations. In some cases, the configuration needs to be edited manually directly in the configuration.yaml file. Most integrations can be configured in the UI. [Learn more] file, restart Home Assistant to apply the changes. The integration is now shown on the integrations page under Settings > Devices & services. Its entities are listed on the integration card itself and on the Entities tab.

# Example configuration.yaml entry
device_tracker:
  - platform: hitron_coda
    host: !secret router_ip
    username: !secret router_username
    password: !secret router_password
    type: rogers

Configuration Variables

Looking for your configuration file?
host string Required

The IP address of your router, e.g., 192.168.0.1.

username string Required

The username to login into the router (user should have read access to the web interface of the router). Usually “cusadmin”.

password string Required

The password for the specified username. Usually your Wi-Fi password.

type string (Optional)

The internet provider for the modem; “rogers” or “shaw”. Defaults to “rogers”.

See the device tracker integration page for instructions how to configure the people to be tracked.