Home ▸ Integrations ▸

Netatmo

The Netatmo integration platform is the main integration to integrate all Netatmo related platforms.

There is currently support for the following device types within Home Assistant:

Binary sensor
Camera
Climate
Cover
Fan
Light
Sensor
Switch
Webhook Events

Configuration

To add the Netatmo hub to your Home Assistant instance, use this My button:

Netatmo can be auto-discovered by Home Assistant. If an instance was found, it will be shown as Discovered. You can then set it up right away.

Manual configuration steps

If it wasn’t discovered automatically, don’t worry! You can set up a manual integration entry:

Browse to your Home Assistant instance.
Go to Settings > Devices & Services.
In the bottom right corner, select the Add Integration button.
From the list, select Netatmo.
Follow the instructions on screen to complete the setup.

Extra configuration of the integration

Configuration of Netatmo public weather stations is offered from the front end. Enter the Netatmo integration and press the “CONFIGURE”, then set “Area name” for new area.

In the dialog, it is possible to create, edit and remove public weather sensors. For each area a unique name has to be set along with an area to be covered and whether to display average, maximum or minimum values.

To edit an existing area, enter its name and follow the dialog.

Binary sensor

The netatmo binary sensor platform is showing the connectivity for the Netatmo Smart Home Weather Station.

Camera

The netatmo camera platform is consuming the information provided by a Netatmo Smart Indoor, Outdoor and Netatmo Smart Video Doorbell camera. This integration allows you to view the current live stream created by the camera (exception: video doorbell).

The doorbell is currently not supported with the Home Assistant Cloud link mode (configured in the integration). Please use a Netatmo dev account. Note that: if you have already created the Netatmo integration, you must remove it and configure it with the Netatmo dev account as explained in the previous link. Then you will see a Smart Doorbell device with a camera sensor.

Climate

The netatmo thermostat platform is consuming the information provided by a Netatmo Smart Thermostat, Smart Modulating Thermostat and Netatmo Smart Radiator Valve. This integration allows you to view the current temperature and control the setpoint.

Cover

The netatmo cover platform provides support for Bubendorff shutters.

Fan

The netatmo fan plaform provides support for Legrand centralized ventilation control.

Light

The netatmo light platform is consuming information provided by a Netatmo Smart Outdoor camera and requires an active webhook. This integration allows you to turn on/off the flood lights. It further provides support for Legrand/BTicino dimmers.

Sensor

The netatmo sensor platform is consuming the information provided by a Netatmo Smart Home Weather Station a Netatmo Smart Indoor Air Quality Monitor device or Netatmo Public Weather Stations.

Switch

The netatmo switch platform provides support for Legrand/BTicino switches and power plugs.

Actions

Set Outdoor Camera Light Mode

set_camera_light_mode

Set the outdoor camera light mode.

Data attribute	Required	Description
`camera_light_mode`	Yes	Outdoor camera light mode.

Set Schedule

set_schedule

Set the heating schedule.

Data attribute	Required	Description
`schedule_name`	Yes	The name of the schedule to activate.

Set preset mode with end date & time

set_preset_mode_with_end_datetime

Set the preset mode for a Netatmo climate device. The preset mode must match a preset mode configured at Netatmo.

Data attribute	Required	Description
`preset_mode`	Yes	Climate preset mode such as Schedule, Away, or Frost Guard.
`end_datetime`	Yes	Date & time until which the preset will be active.

Set temperature with end date & time

set_temperature_with_end_datetime

Sets the target temperature for a Netatmo climate device with an end date & time.

Data attribute	Required	Description
`target_temperature`	Yes	The target temperature for the device.
`end_datetime`	Yes	Date & time the target temperature will be active until.

Set temperature with time period

set_temperature_with_time_period

Sets the target temperature for a Netatmo climate device as well as the time period during which this target temperature applies.

Data attribute	Required	Description
`target_temperature`	Yes	The target temperature for the device.
`time_period`	Yes	Time period during which the target temperature is applied.

Clear temperature setting

clear_temperature_setting

Clears any temperature setting for a Netatmo climate device reverting it to the current preset or schedule.

Set Person Home

set_persons_home

Set a list of persons as at home. Person’s name must match a name known by the Netatmo Smart Indoor Camera.

Data attribute	Required	Description
`persons`	Yes	List of names.

Set Person Away

set_person_away

Set a person away. If no person is set the home will be marked as empty. Person’s name must match a name known by the Netatmo Smart Indoor Camera.

Data attribute	Required	Description
`person`	Yes	Person’s name.

(Un-)Register Webhooks

register_webhook and unregister_webhook

Actions to manually register and unregister the webhook.

Webhook Events

The Netatmo backend sends instant events to Home Assistant by using webhooks which unlocks improved responsiveness of most devices with the exception of Netatmo Smart Home Weather Station, Netatmo Smart Indoor Air Quality Monitor or Netatmo Public Weather Stations.

Warning

Netatmo webhook events have known issues with Home Assistant Cloud Link. It is therefore recommended to use an individual development account.

To be able to receive events from Netatmo, your Home Assistant instance needs to be accessible from the web over port 443. To achieve this you can either use your Nabu Casa account or for example Duck DNS (Home Assistant instructions). You also need to have the external URL configured in the Home Assistant configuration.

Events coming in from Netatmo will be available as an event in Home Assistant and are fired as netatmo_event, along with their data. You can use these events to trigger automations.

You can find the available event types at the official Netatmo API documentation.

Example:

# Example automation for webhooks based Netatmo events
- alias: "Netatmo event example"
  description: "Count all events pushed by the Netatmo API"
  triggers:
    - trigger: event
      event_type: netatmo_event
  actions:
    - action: counter.increment
      entity_id: counter.event_counter

Example:

# Example automation for Netatmo Welcome
- alias: "Motion at home"
  description: "Motion detected at home"
  triggers:
    - trigger: event
      event_type: netatmo_event
      event_data:
        type: movement
  actions:
    - action: persistent_notification.create
      data:
        message: >
          {{ trigger.event.data["data"]["message"] }}  
          at {{ trigger.event.data["data"]["home_name"] }}
        title: "Netatmo event"

Example:

# Example automation for Netatmo Presence
- alias: "Motion at home"
  description: "Motion detected at home"
  triggers:
    - trigger: event
      event_type: netatmo_event
      event_data:
        type: human # other possible types: animal, vehicle
  actions:
    - action: persistent_notification.create
      data:
        message: >
          {{ trigger.event.data["data"]["message"] }}  
          at {{ trigger.event.data["data"]["home_name"] }}
        title: Netatmo event

Example:

# Example automation
- alias: "Door or window open or movement"
  description: "Notifies which door or window is open or was moved"
  triggers:
    - trigger: event
      event_type: netatmo_event
      event_data:
        type: tag_open
    - trigger: event
      event_type: netatmo_event
      event_data:
        type: tag_big_move
    - trigger: event
      event_type: netatmo_event
      event_data:
        type: tag_small_move
  actions:
    - action: persistent_notification.create
      data:
        message: >
          {{ trigger.event.data["data"]["message"] }}
        title: "Netatmo event"

Development / Testing with your own client ID

To enable the Netatmo integration with your own development credentials, you have to declare a new application in the Netatmo Developer Page.

Important

In your Netatmo Application configuration, do not enter a ‘redirect URI’ or a ‘webhook URI’. The ‘webhook URI’ is automatically registered by this integration based on the external URL configured in the Home Assistant configuration.

See Application Credentials for instructions on how to configure your Client ID and Client Secret, then enable Netatmo through the integrations page.

Menu: Settings > Devices & services.

Click on the + sign to add an integration and click on Netatmo. After completing the configuration flow, the Netatmo integration will be available.

Troubleshooting

Receiving events

To confirm your Home Assistant instance is receiving events via webhooks, you can listen to netatmo_event in Developer Tools -> Events.

Light

If the lights show as unavailable the issue usually is that webhook is banned by Netatmo. To solve that unregister the webhook, go to the Netatmo Developer Page to unban your webhook and then register the webhook.

Help us improve our documentation

Suggest an edit to this page, or provide/view feedback for this page.

Edit Provide feedback View pending feedback