(Not necessary if you are using Docker)

When you have the dashboard correctly displaying and interacting with Home Assistant you are ready to install the final component - hapush. Without hapush the dashboard would not respond to events that happen outside of the hadashboard system. For instance, if someone uses the Home Assistant interface to turn on a light, or even another App or physical switch, there is no way for the Dashboard to reflect this change. This is where hapush comes in.

hapush is a python daemon that listens to Home Assistant’s Event Stream and pushes changes back to the dashboard to update it in real time. You may want to create a Virtual Environment for hapush - at the time of writing there is a conflict in the Event Source versions in use between HA and hapush.

Before running hapush you will need to add some python prerequisites:

$ sudo pip3 install daemonize
$ sudo pip3 install sseclient
$ sudo pip3 install configobj

Some users are reporting errors with InsecureRequestWarning:

Traceback (most recent call last):
  File "./hapush.py", line 21, in <module>
    from requests.packages.urllib3.exceptions import InsecureRequestWarning
ImportError: cannot import name 'InsecureRequestWarning'

This can be fixed with:

$ sudo pip3 install --upgrade requests

Configuring hapush (all installation methods)

When you have all the prereqs in place, copy the hapush.cfg.example file to hapush.cfg then edit it to reflect your environment:

ha_url = ""
ha_key = api_key
dash_host = ""
dash_dir = "/srv/hass/src/hadashboard/dashboards"
logfile = "/etc/hapush/hapush.log"
  • ha_url is a reference to your home assistant installation and must include the correct port number and scheme (http:// or https:// as appropriate)
  • ha_key should be set to your key if you have one, otherwise it can be removed.
  • dash_host should be set to the IP address and port of the host you are running Dashing on (no http or https) - this should be the same machine as you are running hapush on.
  • dash_dir is the path on the machine that stores your dashboards. This will be the subdirectory dashboards relative to the path you cloned hadashboard to. For Docker installs this should be set to /app/dashboards
  • logfile is the path to where you want hapush to keep its logs. When run from the command line this is not used - log messages come out on the terminal. When running as a daemon this is where the log information will go. In the example above I created a directory specifically for hapush to run from, although there is no reason you can’t keep it in the hapush subdirectory of the cloned repository. For Docker installs this should be set to /app/hapush/hapush.log

Running hapush

For a manual installation you can then run hapush from the command line as follows:

$ ./hapush.py hapush.cfg

For docker installs, hapush will be started automatically when you run the startup command.

If all is well, you should start to see hapush responding to events as they occur. For a docker install you should see these messages in hapush/hapush.log

2016-06-19 10:05:59,693 INFO Reading dashboard: /srv/hass/src/hadashboard/dashboards/main.erb
2016-06-19 10:06:12,362 INFO switch.wendy_bedside -> state = on, brightness = 50
2016-06-19 10:06:13,334 INFO switch.andrew_bedside -> state = on, brightness = 50
2016-06-19 10:06:13,910 INFO script.night -> Night
2016-06-19 10:06:13,935 INFO script.night_quiet -> Night
2016-06-19 10:06:13,959 INFO script.day -> Night
2016-06-19 10:06:13,984 INFO script.evening -> Night
2016-06-19 10:06:14,008 INFO input_select.house_mode -> Night
2016-06-19 10:06:14,038 INFO script.morning -> Night
2016-06-19 10:06:21,624 INFO script.night -> Day
2016-06-19 10:06:21,649 INFO script.night_quiet -> Day
2016-06-19 10:06:21,674 INFO script.day -> Day
2016-06-19 10:06:21,698 INFO script.evening -> Day
2016-06-19 10:06:21,724 INFO input_select.house_mode -> Day
2016-06-19 10:06:21,748 INFO script.morning -> Day
2016-06-19 10:06:31,084 INFO switch.andrew_bedside -> state = off, brightness = 30
2016-06-19 10:06:32,501 INFO switch.wendy_bedside -> state = off, brightness = 30
2016-06-19 10:06:52,280 INFO sensor.side_multisensor_luminance_25 -> 871.0
2016-06-19 10:07:50,574 INFO sensor.side_temp_corrected -> 70.7
2016-06-19 10:07:51,478 INFO sensor.side_multisensor_relative_humidity_25 -> 52.0