Abode


The Abode integrationIntegrations connect and integrate Home Assistant with your devices, services, and more.
[Learn more]
allows you to integrate your Abode Home Security systems into Home Assistant and use its alarm system and sensors to trigger automations.

Please visit the Abode website for further information about Abode Security.

There is currently support for the following deviceA device is a model representing a physical or logical unit that contains entities. types within Home Assistant:

  • Alarm control panel: Reports on the current alarm status and can be used to arm and disarm the system.
  • Binary sensor: Reports on Quick Actions, Door Contacts, Connectivity sensorsSensors return information about a thing, for instance the level of water in a tank.
    [Learn more]
    (remotes, keypads, and status indicators), Moisture sensors, and Motion or Occupancy sensors.
  • Camera: Reports on Camera devices and will download and show the latest captured still image. Can be turned off and on using the camera.turn_off and camera.turn_on servicesA service carries out one specific task, for example: turn on the light in the living room. A service has targets and data and can be called by actions, a dashboard, or via voice command.
    [Learn more]
    .
  • Cover: Reports on Secure Barriers and can be used to open and close the cover.
  • Lock: Reports on Door Locks and can be used to lock and unlock the door.
  • Light: Reports on Dimmer lights and can be used to dim or turn the light on and off.
  • Switch: Reports on Power Switch and Water Valve devices which can be turned on and off. Also reports on Automations set up in the Abode system and allows you to activate or deactivate them.
  • Sensor: Reports on Temperature, Humidity, and Light sensors.

Configuration

To add the Abode integration to your Home Assistant instance, use this My button:

Abode can be auto-discovered by Home Assistant. If an instance was found, it will be shown as Discovered. You can then set it up right away.

Events

There are a number of eventsAn event is when something happens.
[Learn more]
that can be triggered from Abode. They are grouped into the below events:

  • abode_alarm: Fired when an alarm event is triggered from Abode. This includes Smoke, CO, Panic, and Burglar alarms.
  • abode_alarm_end: Fired when an alarm end event is triggered from Abode.
  • abode_automation: Fired when an Automation is triggered from Abode.
  • abode_panel_fault: Fired when there is a fault with the Abode hub. This includes events like loss of power, low battery, tamper switches, polling failures, and signal interference.
  • abode_panel_restore: Fired when the panel fault is restored.
  • abode_disarm: Fired when the alarm is disarmed.
  • abode_arm: Fired when the alarm is armed (home or away).
  • abode_arm_fault: Fired when the alarm is armed (home or away) and has a fault. This includes open door/windows, low battery, backup connection. abode_arm is not fired if a fault is present.
  • abode_test: Fired when a sensor is in test mode.
  • abode_capture: Fired when an image is captured.
  • abode_device: Fired for device changes/additions/deletions.

All eventsAn event is when something happens.
[Learn more]
have the fields:

Field Description
device_id The Abode device ID of the event.
device_name The Abode device name of the event.
device_type The Abode device type of the event.
event_code The event code of the event.
event_name The name of the event.
event_type The type of the event.
event_utc The UTC timestamp of the event.
user_name The Abode user that triggered the event, if applicable.
app_type The Abode app that triggered the event (e.g., web app, iOS app, etc.).
event_by The keypad user that triggered the event.
date The date of the event in the format MM/DD/YYYY.
time The time of the event in the format HH:MM AM.

There is a unique list of known event_codes that can be found here.

Services

Available servicesA service carries out one specific task, for example: turn on the light in the living room. A service has targets and data and can be called by actions, a dashboard, or via voice command.
[Learn more]
: change_setting, capture_image, trigger_automation

Service change_setting

Change settings on your Abode system. For a full list of settings and valid values, consult the AbodePy settings section.

Service data attribute Optional Description
setting No The setting you wish to change.
value No The value you wish to change the setting to.

Service capture_image

Request a new still image from your Abode camera.

Service data attribute Optional Description
entity_id No String or list of strings that point at entity_ids of Abode cameras.

Service trigger_automation

Trigger an automation on your Abode system.

Service data attribute Optional Description
entity_id No String or list of strings that point at entity_ids of switches that represent your Abode automations.