Vallox
The Vallox integrationIntegrations connect and integrate Home Assistant with your devices, services, and more. [Learn more] lets you control any Vallox ventilation unit that is supported by the vallox_websocket_api
Configuration
To add the Vallox integration to your Home Assistant instance, use this My button:
Manual configuration steps
If the above My button doesn’t work, you can also perform the following steps manually:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the
Add Integration button. -
From the list, select Vallox.
-
Follow the instructions on screen to complete the setup.
Platforms
Fan
The fan platform of this integration allows you to control the entire unit. You can turn the unit on/off using the toggle switch, adjust the fan speed, and select a ventilation profile.
Sensor
The sensor platform allows you to monitor various metrics such as fan speeds, air temperatures, humidity, remaining filter life, cell state, and more.
Binary sensor
The binary sensor platform allows you to monitor the status of the post heater.
Switch
The switch platform allows you to lock the heat recovery bypass.
Number
The number platform gives you control over the supply air temperatures.
Date
The date platform allows you to set the filter change date.
Profile switching
For convenient switching of ventilation profiles in the GUI, just click on the Vallox
fan entityAn entity represents a sensor, actor, or function in Home Assistant. Entities are used to monitor physical properties or to control other entities. An entity is usually part of a device or a service. [Learn more] to get a drop-down menu to select from. Alternatively, the action fan/set_preset_mode
can be used.
The four standard Vallox profiles are supported:
Home
Away
Boost
Fireplace
Fan actions
Action vallox.set_profile_fan_speed_home
Set the fan speed of the Home
profile.
Data attribute | Optional | Description |
---|---|---|
fan_speed |
no | Fan speed in %. Integer , between 0 and 100. |
Action vallox.set_profile_fan_speed_away
Set the fan speed of the Away
profile.
Data attribute | Optional | Description |
---|---|---|
fan_speed |
no | Fan speed in %. Integer , between 0 and 100. |
Action vallox.set_profile_fan_speed_boost
Set the fan speed of the Boost
profile.
Data attribute | Optional | Description |
---|---|---|
fan_speed |
no | Fan speed in %. Integer , between 0 and 100. |
Action vallox.set_profile
Set the profile, and optionally a duration for the profile to be active.
Data attribute | Optional | Description |
---|---|---|
profile |
no | Profile to set, one of home , away , boost , fireplace , or extra . |
duration |
yes | Duration to activate the profile for; in minutes. Integer between 1 and 65535. Only applies to boost , fireplace or extra profiles. 65535 sets the profile without a timeout. |